Omnia Industries Food Processor Omnia One Multicast Stero Audio Processor with SENSUS Manual do Utilizador Página 69
- Página / 71
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
software is always uploaded to the inactive bank. This is a safeguard against loss of power or other interruption
during the update. In this event, the OmniaONE should still boot into the active bank containing the “old” software
(but it is best to avoid interruptions in any case).
To update the OmniaONE software proceed as follows:
1. Download the OmniaONE software update file (.oup) from the Omnia website at:
http://www.omniaaudio.com/support/updates.htm and save it to a convenient location on your computer.
2. Make sure your OmniaONE’s Network Configuration settings have been entered appropriately for your
network (see
Network Configuration on Page 47 for details) and connect your OmniaONE’s Ethernet
(Livewire) jack to your Ethernet network using a standard Cat.5 cable or directly to a computer using a
Cat.5 crossover cable.
3. Open a standard Web Browser on your computer and connect to the OmniaONE by entering:
http://xxx.xxx.x.xxx/ in the browser’s address bar where the x’s in the example above are replaced with the
OmniaONE’s IP address. Once connected you should see the Login screen shown below. Enter the
Password (the default is “
omnia” – all lower case) and click on the “Login” button. (Or simply press
“Enter”)
4. The Main Menu should appear. Click on the “Firmware Update” link option.
5. The “Confirm Firmware Update” screen should appear with the following warning:
“Performing an update requires the controls and meters for the audio processor to be stopped. On-air audio
will not be interrupted during the update. However, a reboot is required to activate the new software, and
this will interrupt the audio. At the end of the process, you will have the option to change the current boot
bank (to activate the new software) and reboot or to keep running the current software and reboot later. Do
you want to continue the update process?”
If you would like to proceed after reading the warning message, click the “Continue” button and the
“Update File” dialog should appear:
6. Click the “Browse” button, locate the software update file downloaded and saved to your computer in Step
1, double-click it so that it appears in the “Update File:” box, then click the “Update” button.
The file will now be uploaded to the OmniaONE. This may take up to 5 minutes. A progress bar may or
may not appear, depending on the browser being used but once the file is successfully uploaded to the
OmniaONE Multicast - Use and Operation Manual – Version 0.90
69
- Omnia ONE 1
- Multicast 1
- Welcome to Omnia.ONE! 3
- OmniaONE Quick-Start Setup 5
- .Multicast 9
- --- Important Note 11
- HAZARD / WARNING LABELS 13
- Manual Update Notification 15
- Chapter-1: Installation 17
- Rear Panel Connections 19
- Ethernet Connection 20
- RS-232 Modem Port 21
- Powering Up 22
- The OmniaONE User Interface 23
- Audio I/O Level Display 24
- Processing Meter Display 24
- Processing Meter Display 24
- Using the Jog Wheel 25
- Main Menu 26
- Quality Versus Density 29
- Increasing Density/Loudness 30
- Equalization (EQ) Changes 31
- Thunder Bass 32
- Processing 33
- Save Preset 34
- Delete Preset 34
- Rename Preset 35
- Adjust Processing 35
- AGC Att (AGC Attack) 36
- Enhancers 37
- Xover (Crossover) 37
- Low Band AGC 38
- Mid Band AGC 39
- High Band AGC 39
- Low Band Limiter 39
- Mid Band Limiter 40
- Presence Band Limiter 40
- High Band Limiter 40
- Bass Clipper 40
- Sensus® 42
- Final Limit 42
- Input/Output 44
- Mtr Select (Meter Select) 45
- Save IO Config 48
- Load IO Config 49
- Delete IO Config 49
- Rename IO Config 49
- Administrative 50
- Lock Front Panel 51
- OmniaONE Multicast 52
- Narrowing down problems 58
- Obtaining Service 60
- Warranty 61
- Update Procedure 63
- Preset Transfer 65
- Trigger Scripts 67
- Software Update Procedure 68
JVC NX-PB10 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für CD Spieler JVC NX-PB10.
Wir stellen PDF-Handbücher JVC NX-PB10 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung
Comentários a estes Manuais